|
Inside the Home
>>>
Home Decor & Accents
>>>
Screens & Room Dividers
|
Hand Railing Balcony Railing Deck Railing FREE SHIPPING
Rustic Log Home Railings Hand Rails Balcony Patio rail
| Start Price |
USD 600.00 |
| Current Price |
USD 600.00 |
| Time Left |
23 days 10 hours 54 minutes |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Sunday, November 02, 2008 |
| End Time |
Saturday, January 31, 2009 |
| Location |
Atwood, TN. |
|
See more about 'Hand Railing Balcony Railing Deck Railing FREE SHIPPING'
|
Description
This rail is a display from a recent show that we have done. We will not do another show for several months and do not want to store this until the next show. This can be used as a Hand Rail, Balcony Rail or Room Divider or whatever idea you come up with. It has some small scratches on it due to it being a display but they are almost unnoticeable. This has never been purchased so it is basically new. We sell these sections for $100 per linear ft plus shipping charges. Shipping can sometimes be as much as the item itself. Since this is a display we are including FREE shipping. The free shipping that is offered on this piece is limited to the lower 48 states and to a commercial location with the ability to unload this item. Residential deliveries, please add $100 to the total to cover residential delivery fees and lift gate charges. This item can also be picked up at the freight terminal of our carrier and save the $100 residential delivery charges if that would work out better for you. Please contact us and we can get back to you and let you know where the closest terminal to you would be for pickup. The over all length of this piece is 78 ¾ inches long. That measurement is from the outside to outside at the feet of the railing. From outside to outside of the 2 X 2 X 11ga steel post it measures 75 3/8 inches long. The cross rails are 1 ½ X 1 ½ X 16ga. Steel tubing and the top rail is 40 ½ inches off the floor. The bottom rail is 4 inches off the floor. The feet are 5 ¼ inch square with a 3/8 hole in each corner. The inside panel is cut from 3/16 thick P/O steel plate. It is welded to the frame is several places around the perimeter of the panel. It was completely welded together and then powder coated with a 40% black polyester finish. Thank You for visiting AJD Designs!!
Place a Bid!
|
|
|
Search
 |
[home] [sitemap]
|